CEL-MAR ADA-13040MG Manual de usuario descargar pdf (Pagina 27)

7. FACTORY DEFAULT

Parameter Value

User name root

Password dbps

IP address Obtain an IP address automatically using DHCP

Operating mode RealPort

Bout rate[bits/sec] 9600

Number of data bits 8

Parity Control no

Number of stop bits 1

Flow Control no

8. PROBLEMS

Problem Solution

I forgot the password

Restoring Default Settings according to steps below:

1. Power OFF the ADA-13040MG

2. Remove the cover of ETHERNET connector,

3. Press RESET “RST” and holding the button turn the power on of ADA-13040MG,

4. Release the button after 20 sec. when the converter will start with default settings.

Restoring Default Settings deletes existing configuration and the proper configuration should be loaded to

the converter form the backup.

I changed the

configuration and the

converter isn't

functioning.

1. Enter in the Internet browser http://address-ip-server,

2. Select the menu [Factory Default Settings] press [Restore].

9. VERSIONS

ADA-13040MG - - -

Order example:

Product Symbol: ADA-13040MG-1-23-3

1 – basic version of electronic,

23 - galvanic isolation 1kV= (3-way) – recommended,

3 - cover without inlets, plug-in screw terminal block,

Electronic versions:

Basic

Galvanic isolation:

1kV DC (2-WAY)

3kV DC (2-WAY)

1kV DC (3-WAY)

3kV DC (3-WAY)

Terminal & Terminal Cover:

Cover without inlets, screw terminal block

Cover without inlets, plug-in screw terminal block

10. SPECIFICATION

Parameters

ETHERNET RS485/RS422

Connector RJ45 Screw terminal block - max. Ø 2,5mm

Max. Line length

LAN up to 150 m 1200 m

Max. number of connected device Depend on addressing type in network 32

Max. baud rate

10/100 Mbit/s Up to 230,4 kbps

ADA-13040MG

1 2 ... 22 23 24 25 26 27 28

User manual 1
ADA-13040MG 10

Comentarios a estos manuales

Sin comentarios

CEL-MAR ADA-13040MG Manual de usuario Pagina 27

Comentarios a estos manuales